Home › Repairs › Brake Pads & Rotors (Front / All Four)

Brake Pads & Rotors (Front / All Four) cost

Brake Pads & Rotors (Front / All Four) on a BMW F30/F32/F36 typically costs $717–$834 at an independent shop, $475–$3,000 at a BMW dealer, or $208–$800 in parts DIY, based on 15 real owner-reported prices.

Last updated October 16, 2026 · Sources: 15 owner-reported prices from 3 cited threads

Pads, rotors and wear sensors on the F3x 3/4 Series. Real prices reported by owners on Reddit and BMW forums, with a link to every one.

AllF30 F32 F36

Limited data: Better now: three threads. Prices are per axle unless marked ALL FOUR.

Typical cost

BMW dealer

$475 – $3,000

Median $950 · 7 data points

Independent shop

$717 – $834

Median $821 · 3 data points

DIY (parts/tools)

$208 – $800

Median $350 · 5 data points

Ranges are the lowest and highest prices in the table below. They are not estimates. Shop prices include parts and labor unless noted.

Every price we found

Price	Where	Details	Source
$1,000	Dealer	Dealer quote "over $1000", FRONT pads + rotors	[1]
$2,200	Dealer	Dealer quote, ALL FOUR corners, F36	[1]
$3,000	Dealer	Dealer quote "a little under 3k", M Sport brakes	[1]
$717	Indy	Indy quote, FRONT pads + rotors (SoCal)	[1]
$300	DIY	FRONT pads + rotors, base brakes	[1]
$800	DIY	ALL FOUR: Zimmermann rotors, Akebono pads, sensors	[1]
$600	DIY	ALL FOUR M Sport: OEM two-piece rotors, pads, brake fluid flush	[1]
$680	Dealer	FRONT pads + rotors + sensors, dealer quote, 440i (2025)	[2]
$580	Dealer	REAR pads + rotors + sensors, same dealer	[2]
$950	Dealer	ALL FOUR rotors, pads and sensors, dealer quote, 2013 328i xDrive (2022)	[3]
$475	Dealer	REAR rotors, pads, sensor, dealer "value service", Westchester NY, all in (2022)	[3]
$834	Indy	FRONT pads + rotors + sensor, popular NJ indy, 2013 328i xDrive (2022)	[3]
$821	Indy	REAR, same NJ indy	[3]
$208	DIY	Zimmermann rotors + Akebono pads, one axle, online (2022)	[3]
$350	DIY	Per axle in the driveway, per a commenter	[2]

Some dealers run "value service" brake pricing that can beat indies. It is worth checking (source 3).
An indy commenter says $100–$125 per corner for labor with your own parts, including a fluid flush (source 3).
Replace the wear sensors (about $10–11) if the warning has already triggered.

How long it takes

Book time is about 1–1.5 hrs per axle, per a commenter (source 3). DIY: 30–60 min per axle (source 2).

Which cars are affected

F30/F32/F36 3 and 4 Series, standard and M Sport brakes.

Symptoms

Brake wear warning on the dash
Grinding or squealing
Pulsing pedal or steering wheel shake when braking

Parts list

Front brake rotors (Zimmermann)	ECS Tuning Pelican Parts Amazon
Front brake pads	ECS Tuning Pelican Parts Amazon
Rear brake rotors and pads	ECS Tuning Pelican Parts Amazon
Brake pad wear sensors	ECS Tuning Pelican Parts Amazon