Home › Repairs › VANOS Solenoids

VANOS Solenoids cost

VANOS Solenoids on a BMW with the N52/N54 engine typically costs $500–$750 at a BMW dealer or $80–$300 in parts DIY, based on 6 real owner-reported prices.

Last updated October 16, 2026 · Sources: 6 owner-reported prices from 5 cited threads

Intake and exhaust VANOS solenoid valves on N52/N54. Real prices reported by owners on Reddit and BMW forums, with a link to every one.

N52N54E90 E92 E60 E83 E82 E70

Limited data: Still no US independent shop price. DIY and dealer data only.

Typical cost

BMW dealer

$500 – $750

Median $625 · 2 data points

Independent shop

No real price found yet

DIY (parts/tools)

$80 – $300

Median $225 · 4 data points

Ranges are the lowest and highest prices in the table below. They are not estimates. Shop prices include parts and labor unless noted.

Every price we found

Price	Where	Details	Source
$500	Dealer	Dealer quote for the solenoids (owner did it himself instead)	[1]
$80	DIY	Pair of solenoids from Amazon, ~15-20 min job	[1]
$300	DIY	"Only $150 each", replace both	[2]
$750	Dealer	Quote to replace both solenoids, 2011 328i (looked like dealer pricing)	[3]
$300	DIY	Pair of genuine BMW solenoids from FCP Euro, 15 min DIY	[3]
$150	DIY	"$150 each"	[4]

UK owners report Pierburg (OE supplier) solenoids at about £90 each, with genuine-price listings from £100 to £200 (source 5). Not converted or counted.
Swapping the two solenoids is a quick way to see if a fault moves from intake to exhaust before buying parts.
The solenoids are interchangeable top/bottom per the BimmerFest thread.

How long it takes

About 15 to 20 minutes for both solenoids, per an owner (source 1).

Which cars are affected

128i/328i/528i, X3 3.0si (N52) and 135i/335i/535i (N54).

Symptoms

Rough idle, stalling at stops
Hesitation / loss of power at highway speed
VANOS codes (e.g. 2A82, 2A87)
Rattle on acceleration ("VANOS rattle")

Parts list

VANOS solenoid valve (N52/N54), priced each	ECS Tuning Pelican Parts Amazon
VANOS solenoid O-rings	ECS Tuning Pelican Parts Amazon
BMW LL-01 engine oil (change right after)	ECS Tuning Pelican Parts Amazon

Check fitment for your exact car (VIN) before ordering. Links may become affiliate links in the future.

Had this done? Share what you paid

Your price helps the next owner judge a VANOS Solenoids quote. We check every submission before adding it.

Form not showing? Open the price form.

Common questions

How much does VANOS Solenoids cost?

VANOS Solenoids on a BMW with the N52/N54 engine typically costs $500–$750 at a BMW dealer or $80–$300 in parts DIY, based on 6 real owner-reported prices.

How much does VANOS Solenoids cost at a BMW dealer?

Real dealer prices we found ranged $500 to $750 (2 data points, median $625).

How much does an independent shop charge for VANOS Solenoids?

We have not found a real independent shop price for this job yet.

Can I do VANOS Solenoids myself?

Owners who did it themselves reported $80 to $300 in parts and tools.

How long does VANOS Solenoids take?

About 15 to 20 minutes for both solenoids, per an owner (source 1).

Which BMWs are affected?

128i/328i/528i, X3 3.0si (N52) and 135i/335i/535i (N54).